SHINGLED TECHNOLOGY

Over 555Wp & Over 660Wp

Shingled technology eliminates traditional ribbon connection with shingles connected in series. By removing the soldered ribbons, the active area of the module is improved and thermal stresses are reduced – resulting in exceptional efficiency and reliability over standard interconnections. Puma modules are based on the shingled technology which allow a higher cells density than standard half-cut modules.

Cells are cut in 5 or 6 pieces, the obtained “shingles” are assembled in strings by connecting front and rear edges of consecutive shingles with an Electrical Conductive Adhesive (ECA).

The ECA replaces the Copper Interconnection Ribbons usually soldered on solar cells, providing a flexible interconnection and avoiding the thermal/mechanical stresses on the Silicon – Copper interface.

SMALL SIZE FOR ROOF TOP INSTALLATION

The PUMA module with power class over 555Wp, efficiency up to 21,6% and 25 years product & output warranty is:

    • Best “Value for money” choice
    • Ideal for rooftop installations (in the
      same size of the rooftop,
      more power can be installed
      compared to standard modules) 
    • Low LCOE

FOR COMMERCIAL & UTILITY INSTALLATIONS

The PUMA module with power class over 670Wp, efficiency up to 21,6% and 25 years product & output warranty.

HALF – CUT TECHNOLOGY

Over 410Wp & Over 655Wp

ADVANTAGES OF PANTHER HALF-CUT MODULES

Ground breaking technology; higher power output. improved system performance – the ideal solution for end users who want a fast turnaround on their investments. A fully certified premium quality and high ef f iciency module made with A grade materials.

LOW PMAX

Industry leading Low Pmax

Outstanding Performance under extreme heat as well as low intensity solar radiation

100% electroluminescence tested

Recom proposes PV modules size according to the customer requirements. Recom uses several cell sizes like:

    • G1:158.75 mm
    • M6: 166 mm
    • M10: 182 mm
    • G12: 210 mm